Aurorean Installation & Service Guide
29
Chapter 2
Controlling System Configuration
Mounting & Connecting Systems
Controlling System Configuration
Although, for security purposes, you should not attach the ANG/APS
systems to your corporate LAN until you have changed their IP addresses (as
described in Chapter 3), once you have connected Ethernet cables to the
systems, your only remaining hardware setup task is to connect a Windows
95/NT 4.0 laptop or desktop computer to the same LAN segment that the
ANG/APS will reside on. This computer will be used to remotely control the
Aurorean Policy Server and/or Aurorean Network Gateway during the
installation process.
Figure 22 illustrates how the systems are properly connected.
Figure 22
Connecting the Systems
APS-3000/7000
ANG-3000/7000
Remote Control
Computer
Common LAN Segment
ANG-1100
