40
Aurorean Installation & Service Guide
Installing New System Software on the ANG-3000/7000
Chapter 3
Installing Software & Setting Networking Configurables
Install New ANG System Software
On the ANG command line, type: rpm -i --force rts-xxx.i386.rpm where xxx is
the correct release, build and patch number (matching the file you transferred
from the CD ROM) and press
ENTER
.
NOTE
Ignore the error messages: “user build does not exist”
CAUTION
If you are simply updating the RPM file, first remove the old file by typing
rpm -e --allmatches rts
and press
ENTER
. Then install as directed above.
Verify ANG’s Date and Time
On the ANG command line, type: date and press
ENTER
. The command line
will show the date, time and time zone. For e
xample:
Thu Dec 28 14:36:37 CST 2001
Change the Time Zone
NOTE
The time zone must be set before setting date and time.
1
At the command line type:
timeconfig
.
2
Use the tab key to select the time zone pulldown box. Use the Up-
Down arrow keys to select the correct time zone.
3
Use the tab key to select OK to choose the new time zone or press
the tab key again to select Cancel; then press
RETURN
.
Change the Date and Time
1
On the ANG command line type
date
then enter
MMDDhhmmYY
