18
Aurorean Installation & Service Guide
Mounting the ANG/APS-3000/7000
Chapter 2
Mounting & Connecting Systems
4
Fasten the front bracket to the rack section with two 8/32 x 0.38”
flathead countersunk Phillips screws, washers, lock-washers and
nuts. Attach the washers and nuts in the order shown in Figure 11.
Figure 11
Attaching the Front Bracket
Determine Correct Position for the Rear Brackets
The exact position of the rear bracket in relation to the rail assembly is
determined by the depth of the rack. Because the rack section of the rail
assembly is a fixed length, use the rear bracket placement to set the rail
assembly length so it fits the rack. Figure 12 shows how placement of the rear
bracket will accommodate the depth of any rack.
Slider section
Front bracket
Flat
Nut
Rectangular cutout
Rack section
on the back side
washer
Lock
washer
