Aurorean Installation & Service Guide
35
Chapter 3
Installing APS-3000/7000 Software
Installing Software & Setting Networking Configurables
4
When the dialog box prompts you to reconfigure your APS, click Yes.
An MS DOS screen appears displaying a Perl script as shown in
Figure 26.
Figure 26
APS Perl Script Screen
5
As prompted, replace the factory default values with the following
new parameters. Consult your VPN Configuration Worksheet as
needed.
–
VPN Name - Designation of the VPN system
–
IP address - IP address of the APS
–
Subnet Mask - Subnet mask of the APS
–
Default Gateway - IP address of the gateway on the APS network
–
Hostname - Designation of the APS
–
DNS Domain Name - Name of the DNS Domain where the APS
resides
6
Type
y
to write this data to the database.
7
When prompted, press
ENTER
.
8
When the Update Service pop-up window appears, click OK.
9
When the Setup Complete window appears, click Finish to complete
the installation and reboot the APS.
