Aurorean Installation & Service Guide
125
Appendix D
Upgrading Release 3.x to 3.5
Aurorean System Upgrades
10
Type
put Linux-2.2.16-2.i386.rpm
and press
ENTER
.
11
Type
put rts-3
.
5
.xx-xxx
.i386.rpm
and press
ENTER
.
12
When the file transfer is complete, type
bye
and press
ENTER
.
ANG Linux Kernel Upgrade (3000/7000)
NOTE
This step is required only if the ANG is running Version 3.1.0 or lower.
Follow the instructions in “Install the New Linux Kernel” on page 120.
ANG Software Upgrade (3000/7000 only)
1
Open a Telnet window on the APS or your laptop and Telnet to the
trusted interface of the ANG.
2
Log in as
netadmin
, with the password
netadmin
.
3
Type
su -
and press
ENTER
.
Type the root password
welcome
and
press
ENTER
.
4
Type
cd /home/ftp/pub
and press
ENTER
or
cd ~ftp
and press
ENTER
.
5
Remove the pre-installed ANG software before installing 3.5. Type
rpm -e - -allmatches rts
and press
ENTER
.
6
Install the new ANG software. Type
rpm -i --force rts-3.5
.xx-
xxx
.i386.rpm
and press
ENTER
.
Ignore several warning messages which appear during installation.
7
When the Linux prompt (#) returns, type
reboot
and press
ENTER
.
Verifying the ANG Configuration
Perform the following steps to use Admintool, a script to verify the ANG
configuration is correct:
1
When the ANG has rebooted and is available on the network, open a
