Emerson Process Management GmbH & Co. OHG
5-12
X-STREAM XE
Instruction Manual
HASXEE-IM-HS
10/2012
If the analyzer is operational and it becomes
clear that the incorrect language has been
set, which is unintelligible to the operator, the
5.6 Selecting the Language
5.6 Selecting the Language
following sequence of keypresses (starting at
the measurement display) can be used to set
the language.
•
down
changes the language.
•
enter
sets this language and the display is
updated accordingly.
•
If the selected language is not the intended,
repeate the last three steps until the inten-
ded language is set.
Note!
Pressing
enter
the 3
rd
time in the main se-
quence highlights the "Language” line.
If the system has been set up accordingly,
the code for access level 1 must be entered
at this point to enable access to the following
menu.
Note!
The factory setting for this unit is "no code
required”. For ease of operation, it is re-
commended to use the factory settings
for access codes while setting up the unit
for the first time. In the following sections,
therefore, no more reference will be made
to any need for entering a code.
Summary of Contents for Rosemount X-Stream Series
Page 535: ......
