Emerson Rosemount Oxymitter DR, Reference Manual

Page: 22 / 98

Relative humidity 5 to 95% (non-condensing)
Signals Analog output/HART: 4-20 mA isolated from power supply, 950
ohms maximum load
Logic I/O: Two terminal logic contact configurable as either an
alarm output or as a bi-directional calibration handshake signal
to Rosemount IMPS 4000 or SPS 4001B, self-powered (+5V) in
series with 340 ohms conduit ports -
¾ -in. -14 NPT (for analog
output and logic I/O signal lines)
Power requirements Normal operation: 175 W
Maximum (warmup): 500 W
Ambient operating
temperature (junction box) 200 °F (93 °C)
160 °F (71 °C) maximum for YEW replacement
Rosemount has satisfied all obligations coming from the
European legislation to harmonize the product requirements in
Europe.
1.4.2 Physical specifications
Materials of
construction Transmitter probe: Process-wetted materials are 316L or 304 stainless
steel.
Rosemount
™
Oxymitter Transmitter electronics housing (integral to
probe or remote mounted): Low copper aluminum IP66 (NEMA 4X)
with reference air exhaust port piped to clean area
Optional Rosemount Xi Electronics: NEMA 4X, polycarbonite material
Process
connections 2-in. 150# (4.75-in. [121 mm] bolt circle); DIN (5.71-in. [145 mm] bolt
circle)
Note
Flanges are flat-faced and for mounting only. Flanges are not
pressure-rated. Spool piece part numbers are available to offset
electronics housing from hot ductwork. Many adapter flanges are
available to mate to existing flanges.
Orientation Vertical or horizontal mount
Table 1-7: Probe Lengths and Approximate Shipping Weights
Length Weight
18 in. (457 mm) 16 lb. (7.3 kg)
3 ft. (0.91 m) 21 lb. (9.5 kg)
6 ft. (1.83 m) 27 lb. (12.2 kg)
9 ft. (2.74 m) 33 lb. (15.0 kg)
12 ft. (3.66 m) 39 lb. (17.7 kg)
15 ft. (4.57 m) 45 lb. (20.5 kg)
18 ft. (5.49 m) 51 lb. (23 kg)
Description and specifications Reference Manual
October 2019 00809-0100-4880
22 Emerson.com/Rosemount