Emerson Rosemount 1056, Instruction Manual

Page: 44 / 126

36
Figure 5-3. Setting a Security Code
MAIN
MENU
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
Program
Outputs
Measurement
Temperature
Diagnostic Setup
Ambient AC Power:Unk
Reset Analyzer
S1: 1.234µS/cm 25.0ºC
S2: 12.34pH 25.0ºC
Security
Calibration/Hold: 000
All: 000
Security
Program
5.5 Setting A Security Code
5.5.1 Purpose
The security codes prevent accidental or unwanted
changes to program settings, displays, and calibration.
Model 1056 has two levels of security code to control
access and use of the instrument to different types of
users. The two levels of security are:
- All: This is the Supervisory security level. It
allows access to all menu functions, including
Programming, Calibration, Hold and Display.
- Calibration/Hold: This is the operator or
technician level menu. It allows access to
only calibration and Hold of the current outputs.
5.5.2 Procedure
1. Press MENU. The main menu screen appears.
Choose Program .
2. Scroll down to Security. Select Security .
3. The security entry screen appears. Enter a
three digit security code for each of the desired
security levels. The security code takes effect
two minutes after the last key stroke.
Record the security code(s) for future access
and communication to operators or techni-
cians as needed.
4. The display returns to the security menu
screen. Press EXIT to return to the previous
screen. To return to the main display, press
MENU followed by EXIT.
Fig. 5-3 displays the security code screens.
Instruction Manual
LIQ-MAN-1056
Section 5.0: Programming the Analyzer - Basics
April 2017