![background image](http://html.mh-extra.com/html/emerson/pm8560/pm8560_user-manual_101424135.webp)
Monitor:
Environment Variables
10006609-03
Pm8560
User’s Manual
11-23
ENVIRONMENT VARIABLES
Table 11-3
lists the monitor’s standard environment variables.
Table 11-3:
Standard Environment Variables
The monitor supports optional environment variables that enable additional functionality.
The moninit command (see page 11-20) only affects the standard environment variables
and does not set any parameters for these optional variables.
Variable:
Default:
Description:
baudrate
9600
Console baud rate.
Valid rates: 9600, 14400, 19200, 38400, 57600, 115200
bootcmd
undefined
Command to be executed after boot. Use a backslash and
semicolon to specify more than one item. For example, setenv
bootcmd monrecovery\;watchdog\;bootv\;
bootdelay
3
Choose the number of seconds the Monitor counts down before
booting user application code
Valid options: time in seconds, -1 to disable autoboot
bootfile
" "
Path to boot file on server (used with TFTP)—set this to the
“path/file.bin” to specify filename and location of the file to load
clearmem
on
Select whether to clear unused SDRAM (memory used by
monitor is excluded) on power-up and reset
Valid options: on, off
gatewayip
0.0.0.0
Select the network gateway machine IP address
ipaddr
0.0.0.0
Board IP address
loadaddr
0x100000
Define the address to download user application code (used
with TFTP)
model
Pm8560
Board model number
netmask
0.0.0.0
Board sub-network mask
powerondiags
on
Turns power-on/reset POST diagnostics on or off
Valid options: on, off
serial#
xxxxx
Board serial number
serverip
0.0.0.0
Boot server IP address
watchdog_disable
off
Select on to disable the watchdog feature
Valid options: on, off
watchdog_period
undefined
Choose the number of seconds to change the watchdog period
Valid options: time in seconds, 0 disables watchdog on the next
watchdog command entered
Removing the value leaves the watchdog on at monitor default
(10 seconds). Run the watchdog command to change the
period.
Summary of Contents for Pm8560
