40
C6.1.6/0117-1017/E
terminations for tightness and to carry out a visual inspection of the low voltage crimped terminals at
least once every 6 months.
5.4 Routine leak testing
NOTE: In order to meet the requirements of the Ecodesign Directive 2009/125/EC with regard
to efficient system operation, ensure the refrigerant and oil charges are sufficient.
All joints inside the system should be leak-tested as part of a regular maintenance schedule.
5.5 Condenser fan(s) & motor(s)
A yearly inspection of these items is recommended. Fastenings can become loose, bearings may
wear and fans may require cleaning of solid deposits that can cause rotational imbalance. Motors
come with lifelong lubrication bearings that do not require lubricating on a routine basis, but just need
to be checked for wear.
6
Certification & approval
▪
Copeland EazyCool ZX condensing units comply with the Low Voltage Directive
LVD 2014/35/EU. The applied harmonised standard is EN 60335-2-891 (Safety Household and
Similar Electrical Appliance, Part 2: Requirements for commercial refrigerating appliances with
an incorporated or remote refrigerant condensing unit or compressor).
▪
The piping complies with the Pressure Equipment Directive PED 2014/68/EU (Art.3 §3 - Sound
Engineering Practice).
▪
The condensing units and their components are CE marked as far as required and thereby
establish conformity with the relevant directives.
▪
Conformity Declarations for components are available as far as required.
▪
The Manufacturer's Declaration of Incorporation has to be respected when incorporating these
products into a machine.
7
Dismantling & disposal
Removing oil and refrigerant:
▪
Do not disperse in the environment.
▪
Use the correct equipment and method of removal.
▪
Dispose of oil and refrigerant according to national legislation and
regulations.
▪
Dispose of compressor and/or unit according to national legislation
and regulations.
DISCLAIMER
1. The contents of this publication are presented for informational purposes only and are not to be
construed as warranties or guarantees, express or implied, regarding the products or services
described herein or their use or applicability.
2. Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as
applicable, reserve the right to modify the design or specifications of such products at any time
without notice.
3. Emerson does not assume responsibility for the selection, use or maintenance of any product
.
Responsibility for proper selection, use and maintenance of any Emerson product remains solely
with the purchaser or end user.
4. Emerson does not assume responsibility for possible typographic errors contained in this
publication.