EDNord Magicolor 3300 User Manual Download

Page: 24 / 198

Media Storage and Handling

Layered

Adhesive

Folded, creased, embossed, warped, or wrinkled

Perforated, three-hole prepunched, or torn

Too slick, too coarse, too textured

Different in texture (roughness) on the front and back

Too thin or too thick

Stuck together with static electricity

Composed of foil or gilt; too luminous

Cold water transfer paper

Heat sensitive or cannot withstand the fusing temperature (between
316° F/158° C and 356° F/180° C, depending on the media)

Irregularly shaped (not rectangular or not cut at right angles); not uniform
in size

Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

Acidic

Any other media that is not approved

Use media that is

Suitable for plain-paper laser printers, such as standard or recycled office
paper

What should I watch out for when loading envelopes?

Do not use envelopes that have

Sticky flaps

Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for
sealing

Transparent windows

Too rough of a surface

Material that will melt, vaporize, offset discolor, or emit dangerous fumes

Been presealed

Use envelopes that are

Common office envelopes with diagonal joints, sharp folds and edges,
and ordinary gummed flaps

Approved for laser printing

Dry

Printed on the front address side only

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for Magicolor 3300







































































































































































































Search results

Summary of Contents for Magicolor 3300

Reviews:

Related manuals for Magicolor 3300

Brands by name

Popular brands

EDNord Magicolor 3300, User Manual

Search results

Summary of Contents for Magicolor 3300

Reviews:

Related manuals for Magicolor 3300

Brands by name

Popular brands