EDNord Magicolor 3300 User Manual Download

Page: 130 / 198

Status, Error, and Service Messages

122

PUT <

TYPE

MEDIA

> IN

INPUT

> BIN

Operator Control/Chain
Inputbins is set to On
and a chained tray is
empty.

Refill the tray with the
specified type media.

PUT <

> IN

INPUT <

The

<X>

specified

media is not in the input
tray

<Y>

Refill the tray with the
specified type media.

REPLACE <

The specified item

<X>

needs to be replaced,
such as the fuser unit,
the transfer unit, and the
imaging unit.

Replace the specified
item.

RESETTING ACC

TO INITIAL

STATE

The accounting files
have been reset.

No action needed.

RESETTING

ACCOUNTING

The reset accounting
operation is in process.

Wait. No other action
needed.

SYS UPDATE

ERROR <

The indicated error

<X>

has been reported.

Verify the update
file and send it
again or check with
printer.konicaminolta.net/
support (click on Answer
Base) for the latest code
update.

TRANSFER UNIT

MISSING

The transfer unit isn’t
installed correctly.

Remove and reinstall the
transfer unit.

WAITING FOR

IDLE

An active job is in pro-
cess. Access to the
menu is not allowed
until the job is finished.

Wait until the print job is
finished and the printer
goes idle.

WARMING UP

The printer is warming
up and getting ready to
go online.

Wait. No other action
needed.

This message...

means...

do this...

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for Magicolor 3300







































































































































































































Search results

Summary of Contents for Magicolor 3300

Reviews:

Related manuals for Magicolor 3300

Brands by name

Popular brands

EDNord Magicolor 3300, User Manual

Search results

Summary of Contents for Magicolor 3300

Reviews:

Related manuals for Magicolor 3300

Brands by name

Popular brands