manualshive.com logo in svg

EDNord Magicolor 3300, User Manual

The EDNord Magicolor 3300, a high-performance printer, enchants with its vibrant color prints. To unlock its full potential, grab the free user manual from our website manualshive.com. With clear instructions, this manual guarantees a hassle-free experience, enabling you to harness the magic of this exceptional product.

Share
Download
background image

Software Utilities CD-ROM 

3

Drivers and PPDs

Manual installation instructions are provided in the readme files on the 
Software Utilities CD-ROM in case you need them.

Utilities

Drivers

Use/Benefit

Installation 
Instructions

PostScript 2/3 
Drivers

Windows 
XP/2000

Windows 
Me/98

Windows NT4

These drivers give you access to all of 
the printer’s features, including finishing 
and advanced layout 

“Installing Printer 
Drivers and Utilities, 
Windows 
Environments” on 
page 5

PCL 6 Driver

Windows 
XP/2000

This driver gives you access to all of the 
printer’s features, including finishing and 
advanced layout. It also includes 
support for Arabic, Greek, and Hebrew 
fonts and font sets.

“Installing Printer 
Drivers and Utilities, 
Windows 
Environments” on 
page 5

Macintosh PPDs

PostScript Printer Description (PPD) 
files allow you to configure options such 
as memory and informs the computer 
what options and features are available.

Readme on the 

Software Utilities 

CD-ROM

Windows PPDs

These PPD files allow you to install the 
printer for a variety of platforms, drivers, 
and applications.

Readme on the 

Software Utilities 

CD-ROM

Linux PPDs

These PPDs can be used with 
third-party Linux print filters that use 
PPDs.

Readme on the

 

Software Utilities 

CD-ROM

Utilities

Use/Benefit

Installation 
Instructions

Crown Print 
M for 
Windows

This Windows utility provides an efficient 
method for transporting print jobs 
directly to a KONICA MINOLTA printer 
via the TCP/IP protocol. 

Readme on the

Software Utilities 

CD-ROM

Download
Manager

This utility provides the ability to 
download fonts and overlays to the 
printer’s hard disk. It also allows you to 
download fonts to printer memory.

Readme on the

Software Utilities 

CD-ROM

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for Magicolor 3300







































































































































































































Reviews:

No comments

Related manuals for Magicolor 3300

NCR 7150 Quick Start Manual preview
7150
Brand: NCR Pages: 2
Xerox 4215 Operator'S Manual preview
4215
Brand: Xerox Pages: 414
Canon imageRUNNER 2545i Addendum Manual preview
imageRUNNER 2545i
Brand: Canon Pages: 37
Oki MPS710c User Manual preview
MPS710c
Brand: Oki Pages: 99
ioCorp ADAPTIO 5760e User Manual preview
ADAPTIO 5760e
Brand: ioCorp Pages: 18
MF DIGITAL PJ-6000 D Quick Manual preview
PJ-6000 D
Brand: MF DIGITAL Pages: 2
BART-TECH 3D BT1.2 Operating Manual preview
BT1.2
Brand: BART-TECH 3D Pages: 34
Oki B411d Guide Utilisateur preview
B411d
Brand: Oki Pages: 157
X-media XM-PS110P Quick Installation Manual preview
XM-PS110P
Brand: X-media Pages: 10
Xerox AltaLink C81 Series User Manual preview
AltaLink C81 Series
Brand: Xerox Pages: 412
E-Pos TEP-220M User Manual preview
TEP-220M
Brand: E-Pos Pages: 21
Kyocera KYOCERA FS-C8100DN Manual preview
KYOCERA FS-C8100DN
Brand: Kyocera Pages: 12
Custom Audio Electronics KPM 216 H User Manual preview
KPM 216 H
Brand: Custom Audio Electronics Pages: 88
Ricoh PRSPC342DN1 User Manual preview
PRSPC342DN1
Brand: Ricoh Pages: 120
Kyocera ECOSYS M2635dw Frequently Asked Questions Manual preview
ECOSYS M2635dw
Brand: Kyocera Pages: 72
Ricoh SP 213Nw Setup Manual preview
SP 213Nw
Brand: Ricoh Pages: 23
Xerox Phaser 6200 Brochure & Specs preview
Phaser 6200
Brand: Xerox Pages: 4
Emerson RXi HMI GFK-3233A Instructions Manual preview
RXi HMI GFK-3233A
Brand: Emerson Pages: 20

Brands by name

Popular brands

Load more brands