EDNord Magicolor 3300, User Manual

Page: 26 / 198

Media Storage and Handling 18
Do not use transparencies that
Are coated, such as transparencies designed for most color printers
Have static electricity that will cause them to stick together
Use transparencies that are
Monochrome, uncoated transparencies (also known as OHP film)
Refer to page 29 for information about the recommended
Q-Media.
General Notes about Media
If you’re printing simplex pages, load the media printing-side down in the mul-
tipurpose tray, but printing-side up in the other trays. The top of the sheets of
media should be toward the back of the printer.
Often, an arrow on the media package label indicates the printing side of the
media. If you can’t determine which side of the media to print on, remove the
media from the tray, rotate the stack 180°, turn the stack over, and then place
it back in the tray.
Attention
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
Media Trays
Tray
Location Media Tray Sheet Capacity
for Letter/A4-
sized Media
Printer Upper (standard) tray 500
Multipurpose 100
High-Capacity
Input Feeder
(1x500) Optional Tray (1x500) 500
High-Capacity
Input Feeder
(2x500) Optional Tray 1 (2x500)
Optional Tray 2 (2x500) 1,000
(500 sheets each)
Notes: You may rename these trays for your convenience. See the
Crown Books in PDF on the Software Utilities CD-ROM for
more information.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500