EDNord Magicolor 3300 User Manual Download

Page: 25 / 198

Media Storage and Handling

What should I watch out for when loading labels?

Do not use label sheets that

Have labels that easily peel off

Have the backing sheets that have peeled away or have exposed
adhesive

Labels may stick to the fuser, causing them to peel off and media jams to
occur.

Are precut

Use label sheets that are

Recommended for laser printers

What should I watch out for when loading postcards?

Do not use postcards that are

Coated

Warped

Designed for inkjet printers

Multicolored

Preprinted or multicolored (may result in printer jamming)

Use postcards that are

Japanese Post Office standard postcards (3.9x5.8" [100x148 mm]) rec-
ommended for laser printers

What should I watch out for when loading transparencies?

Attention

Use only the KONICA MINOLTA-approved transparencies. Check
printer.konicaminolta.net/support (click on Answer Base) for currently
approved media. To order approved transparencies, go to
www.q-shop.com.

Shiny backed paper

Paper cut into labels

Full page labels
(uncut)

Do not use

OK to use

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for Magicolor 3300







































































































































































































Search results

Summary of Contents for Magicolor 3300

Reviews:

Related manuals for Magicolor 3300

Brands by name

Popular brands

EDNord Magicolor 3300, User Manual

Search results

Summary of Contents for Magicolor 3300

Reviews:

Related manuals for Magicolor 3300

Brands by name

Popular brands