![ECKELMANN UA 400 Operating Instruction Download Page 126](http://html.mh-extra.com/html/eckelmann/ua-400/ua-400_operating-instruction_533231126.webp)
Firmware V3.15
21.04.2021
126/401
•
•
•
8 Operation of UA 400
8.1 Operation possibilities
The controller provides menus and screens for the display and adjustment of values. However, no operation
for this is provided on the controller itself. The actual operation of these menus is performed externally using
the following possibilities:
Local operation with a BT 300 x operator interface:
The operation is performed directly on-site at the
controller with an operator interface of the BT 300 series.
See chapter
Local operation with a BT 300 x operator interface
for details for the operation.
Remote control via the terminal:
The controller can be operated remotely (e.g. from the machine room)
using the system centre, a store computer or an operator terminal. The communication with the controller is
performed via the CAN bus
See chapter
for details for the operation.
Remote control with PC software LDSWin:
A PC with LDSWin installed is connected to the system
centre or the store computer. The connection can be made here, for example, via the serial interface, a
modem, a network or the PC-CAN bus adapter. In this way, the controller can be operated very conveniently
with the PC software and its powerful functions such as controller analysis, evaluations, storing parameter
sets, creating lists, etc.
See the LDSWin operating instruction for details about the range of functions.
Summary of Contents for UA 400
