41
Instruction Manual IM02602008E - Rev. D
Transformer Temperature Controllers
IM02602008E - Rev. D May 2019 www.eaton.com
4.2.4.1.7 Date/Time
Select
Date/Time
. The Date/Time configuration parameters will appear.
1. Select the date and time for the system clock, as follows.
Year
sets the year desired, from
2000-3000
.
Month
sets the month desired, from
1-12
.
Day
sets the day of the month, from
1-31
.
Hours
sets the the hour desired, from
0-23
.
Minutes
sets the the minutes desired, from
0-59
.
otee:
N
The
Date and Time
displayed when entering this screen depends on
the options menu used to get here. If
New
is selected, this is the
date and time taken from the laptop clock when the New button was
clicked. When
Open
is selected this is the date and time that was
selected when the configuration file was saved. When
Read
is select-
ed this is the date and time read from the TC device when the Read
button was clicked.
otee:
N
The
Set Current Date/Time
option is available when an existing con-
figuration is
Open
from a laptop file or when the configuration is
Read
from a connected device. Selecting this option populates the date and
time parameters from the laptop clock. If the
Write
option is used after
selection of this option, the current date/time is re-read from the laptop
clock and sent to the TC device to ensure synchronization with the lap-
top clock. Although this option is not present when a
New
configura-
tion is selected, it is the default configuration for date/time.
2. Click the
To Device
check box to save this setting to the TC device when
the
Write
function is selected.
3. Click
Next
or
Previous
, or use the mouse, to select another configu-
ration category.
4. When all configuration parameters have been changed/selected click
Write
to save all selected parameters to the TC device, or click
Save
or
Save As
to store this configuration as a file on the laptop for later
use.
