Eaton TC-50 Modbus, Instruction Manual

Page: 44 / 92

40
Instruction Manual IM02602008E - Rev. D
Transformer Temperature Controllers IM02602008E - Rev. D May 2019 www.eaton.com
1. Select the Modbus parameters desired, as follows:
Baud Rate sets the baud rate desired. The options are 9600 , 19200 , or
38400 . The default is 9600 .
Parity sets the parity desired. The options are Odd , Even and None . The
default is None .
Stopbits sets the stopbit desired. The options are One or Two . The default is
Two .
Modbus Address sets the Modbus address desired, from 1- 247 . The default
is 1 .
2. Click the To Device check box to save this setting to the TC device when the
Write
function is selected.
3. Click Next or
Previous
, or use the mouse, to select another configura-
tion category.
4. When all configuration parameters have been changed/selected click
Write
to save all selected parameters to the TC device, or click
Save
or
Save As
to store this configuration as a file on the laptop for later use.
4.2.4.1.6 Trend Data Interval (TC-100 Only)
Select
Trend Data Interval . The Trend Data Interval configuration parameters
will appear.
1. Select the Trend time interval for logging trend data or disabling the logging
of data, as follows.
Trend Time Setting sets the time period desired. The options are Off ,
Minutes , Hours , or Days . The default is Hours .
Trend Time Increment Settings sets the tie interval desired for logging
trend data. The options range and default change based on the previous Trend
Time Setting.
For
Minutes , the range is 1-60 and the default is 30 .
For Hours the range is 1-24 and the default is 12 .
For Days the range is 1-30 and the default is 1 .
If the Trend Time Setting is Off , no trend data will be recorded and there will
be no option for Trend Time Increment Settings. are 1-60 . The default is 12
(Hours).
2. Click the To Device check box to save this setting to the TC-100 when the
Write function is selected.
3. Click
Next
or Previous , or use the mouse, to select another configura-
tion category.
4. When all configuration parameters have been changed/selected click Write
to save all selected parameters to the TC-100, or click Save or Save As
to store this configuration as a file on the laptop for later use.