36
Instruction Manual IM02602008E - Rev. D
Transformer Temperature Controllers
IM02602008E - Rev. D May 2019 www.eaton.com
4.2.4 Configuration
The
Configuration
function allows you to set/change the TC device param-
eters.
Select
Configuration
on the function bar to display the configuration
options bar, shown in Figure 13, across the bottom of the main menu.
The options available are:
•
New
- Creates a new configuration starting from a default setup.
•
Open
- Opens an existing configuration file from PC memory.
•
Save
- Saves the current configuration file to PC memory.
•
Save As
- Saves the current configuration file to a PC file whose name and
location is specified by the user.
•
Read
- Reads the configuration parameters from a connected TC device.
•
Write
- Writes the selected configuration parameters to the TC device.
•
- Prints the configuration parameters.
4.2.4.1 Creating New Configuration Files
Select
Configuration
then
New
to create a new configuration starting
from a default set of parameters. The Select Device pop up menu appears, as
shown below.
Select
the TC device desired (TC-50, TC-50 Modbus, or TC-100) then click OK.
The Select All Parameters menu appears. The menu shown is for the TC-100,
but is the same for the TC-50 Modbus and TC-50 except that Trend Data
Interval and Airflow Sensing parameters will not appear.