87
5. Parameter Description
Eaton Electric General Inverters DF1 Series
UMXXXXXXXXE February 2020 www.eaton.com
Group
Parameter
Number
Name
Setting Range
Factory
Value
User
settings
02-54
P.541
AO1/FM fixed output level
0~100.0%
0.0%
02-55
P.592
PT100 voltage level 1
0~10.00V
5.00V
02-56
P.593
PT100 voltage level 2
0~10.00V
7.00V
02-57
P.594
PT100 level 1starting
frequency
0~650.00Hz
0.00Hz
02-58
P.595
Starting PT100 level 1 delay
time
0~6000s
60s
02-59
P.187
FM calibration parameter
0~9998
450
5.3.1 Function selection of analog terminal and DIH terminal
• Input function selection of terminal 1, 2, 3 and DIH.
Input function selection
•
When frequency reference is selected, 0~±10V/4~20mA corresponds to 0~the maximum output frequency setting.
ote:
N
1. The default priority level of terminal function selection is AI1 > AI3 >AI2 > DIH, so if you want toset the terminal AI2 as fre-
quency reference, 02-00 and 02-01 should be set at 0.
2. The function selection of terminal DIH 02-03 is only valid in the mode of tension.
Parameter
Name
Factory
Value
Setting Range
Content
02-00
P.500
Function selection of
terminal AI1
1
0
Non-function
1
Frequency reference
2
Torque reference
3
PID target value
4
PID feedback signal
5
Target tension setting
6
Line speed setting
7
Feedback line speed
8
Real-time curling radius
9
Initial curling radius
10
Material thickness
11
PTC
12
PT100
13
VF detached function
14
Positive torque limit
15
Negative torque limit
16
Positive/negative torque limit
17
Retrogradetorque limit
02-01
P.501
Function of terminal AI3
1
Same as 02-00
Same as 02-00
02-02
P.504
Function of terminal AI2
0
Same as 02-00
Same as 02-00
02-03
P.503
Function of terminal DIH
0
Same as 02-00
Same as 02-00
