Eaton PowerXL DF1 Series, User Manual

Page: 144 / 284

144
5. Parameter Description
Eaton Electric General Inverters DF1 Series UMXXXXXXXXE February 2020 www.eaton.com
Group
Parameter
Number
Name Setting Range
Factory
Value
User
settings
06-13 P.281 Input phase failure protection
0: No Phase Failure Protection
0
1: Phase failure protection, the parameter unit will
display the “IPF” alarm and the output stops.
06-14 P.287
SCP Short circuit protection
function
0: No the output end short-circuits protection function.
1
1: If outputend is short, the parameter unit will display
the “SCP” alarm and the output stops.
06-15 P.533 The process mode of PTC alarm
0: Alarm and continue to run
0
1: Alarm and decelerate to stop
2: Alarm and stop freely
3: No alarm
06-16 P.534 The percentage of PTC level 0~100.0% 0.0%
06-17 P.261 Maintenance alarm function
0: No maintenance alarm
0
1~9998day: Used to set time whenmaintenancealarm
sends out signal
06-18 P.280
Short circuit detection when
starting
0: No short circuit detection when starting
0
1: Short circuit detection when starting
06-19 P.282 Operation GF detection level
280K/315KF types below: 0~100.0% 50.0%
315K/355KF type: 0~100.0% 70.0%
06-20 P.262 Output phase failure protection
0: No output phase failure protection selection
0
1: Output phase failure protection, the parameter unit
will display the “LF” abnormal alarm and the invert-
er will stop the output.
06-21 P.705 Low voltage level
155~220V: 220V inverter type 155V
310~440V: 440V inverter type 310V
06-22 P.706
Regenerative brake operation
level
205~400V: 220V inverter type 360V
410~800V: 440V inverter type 720V
06-23 P.707 Voltage stall level
205~400V: 220V inverter type 380V
410~800V: 440V inverter type 760V
06-24 P.708 Capacitor lifetime detection 0: No capacitor lifetime detection. 0
06-24 P.708 Capacitor lifetime detection
1: When the power is OFF, start to detect the lifetime of
electrolytic capacitor on main circuit.
0
06-25 P.709
Capacitor lifetime detection
level
0~100.0% 100.0%
06-26 P.710
Capacitor lifetime detection
result
0: No abnormal signal.
Read
1: Electrolytic capacitor abnormal.
06-27 P.292
Accumulative motor operation
time (minutes)
0~1439min 0min
06-28 P.293
Accumulative motor operation
time (days)
0~9999day 0day
06-29 P.296
Accumulative motor power time
(minutes)
0~1439min 0min
06-30 P.297
Accumulative motor power time
(days)
0~9999day 0day
06-40 P.288 Alarm code query 0~12 1