USING THE WEB INTERFACE
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008
72
Configuring SMTP Logging
To configure Simple Mail Transfer Protocol (SMTP) logging:
1.
Select
Device Settings
, and then select
Event Log
. The Event Log Settings page
displays. The
SMTP Logging
panel controls SMTP logging (see Figure 68).
Figure 68. SMTP Logging Panel
2.
Select the
SMTP Logging Enabled
check box.
3.
Type the receiver’s email address in the
Receiver Email Address
field.
4.
By default, when SMTP logging is enabled, seven event types display in the
Event Log Assignments
panel to the right. All are disabled by default. To enable any
of these event types, select the appropriate check boxes. See Figure 69.
Figure 69. Event Log Assignments Panel
5.
Click
Apply
. SMTP Logging is configured.
NOTE
If you have not configured the ePDU SMTP settings, you must do so for SMTP logging to work. Click
the
here
link at the bottom of the panel. See Configuring the SMTP Settings" on page 80 for instructions.
Summary of Contents for Managed ePDU
