Eaton Managed ePDU, User Manual

Page: 100 / 129

USING THE CLP INTERFACE
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008 90
3. At the Command prompt, type CLP and press Enter . You are prompted to enter a
login name. The login name is case−sensitive, so make sure you capitalize the
correct letters. See Figure 89.
Figure 89. Login Prompt
4. Type a login name and press Enter . You are prompted to enter a password
(see Figure 90).
Figure 90. Password Prompt
5. Type a password and press Enter . The password is case−sensitive, so make sure
you capitalize the correct letters. Once the password is accepted, the
clp:/ − >
system prompt appears. See Figure 91.
Figure 91. System Prompt
You are now logged into the CLP interface and can begin using the interface to
administer the ePDU.