Eaton Managed ePDU, User Manual

Page: 101 / 129

USING THE CLP INTERFACE
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008 91
Using SSH or Telnet
To log in using SSH or Telnet:
1. Launch an SSH or Telnet client such as PuTTy and open a console window. A
Login prompt appears (see Figure 92).
Figure 92. Login Prompt
2. Type a login name and press Enter . You are prompted to enter a password
(see Figure 93).
Figure 93. Password Prompt
3. Type a password and press Enter . The password is case−sensitive, so make sure
you capitalize the correct letters. Once the password is accepted, the
clp:/ − >
system prompt appears. See Figure 94.
Figure 94. System Prompt
You are now logged into the CLP interface and can begin using the interface to
administer the ePDU.