background image

USING THE WEB INTERFACE

EATON 

Managed ePDU

t

 User’s Guide  

S

  164201xxx Rev 1

 DRAFT 10−OCT−2008

38

2.

Select the user group from the 

Group

 list. The permissions that apply to this

group are displayed. If this is the first time you are setting the permissions for
this group, all permissions are set to 

No

.

3.

Set the permissions as necessary. Click this icon 

 in a field and select either

Yes

 or 

No

.

4.

When you are finished, click 

Apply

. The permissions are applied to the user

group.

NOTE  

The 

User (not in a group)

 list on this page is used to set individual user permissions. If you are

setting group permissions, you may ignore this field.

Copying a User Group

You can create a new user group with the exact same permissions as an existing user
group by using the copy function. You can then modify the group so that its
permissions differ as necessary from the original. This is a quick and easy way to
create user groups.

To copy a user group:

1.

Select 

User Management

, and then select 

Users & Groups

. The User/Group

Management page displays.

2.

Select the existing user group from the 

Existing Groups

 list.

3.

Type the name of the new user group in the 

New Group Name

 field.

4.

Click 

Copy

. A new user group is created with the same permissions as the

existing group. The new user group can be viewed by clicking the 

Existing Groups

list.

Modifying a User Group

The only attribute of a user group that can be modified is the group name. To do this:

1.

Select 

User Management

, and then select 

Users & Groups

. The User/Group

Management page displays.

2.

Select the user group you want to modify from the 

Existing Groups

 list. The name

displays in the 

New Group Name

 field.

3.

Make any necessary changes to the name.

4.

Click 

Modify

. The user group is modified.

NOTE  

To modify a user group’s system or outlet permissions, repeat the procedure for setting the system

or outlet permissions described above and make any necessary changes.

Summary of Contents for Managed ePDU


































































































































Reviews: