Eaton Managed ePDU, User Manual

Page: 107 / 129

USING THE IPMI TOOL SET
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008 97
$ ipmitool − I lan − H test − pdupcr20 − 20 − U admin − P pass channel
setaccess 14 63 privilege=5
getciphers <all | supported> <ipmi | sol> [channel]
Purpose:
Displays the list of cipher suites supported for the given application (ipmi or sol) on
the given channel.
Example:
$ ipmitool − I lan − H test − pdupcr20 − 20 − U admin − P pass channel
getciphers ipmi 14
Event Commands
The Event commands allow you to send predefined events to a management
controller.
<predefined event number>
Purpose:
Sends a predefined event to the System Event Log. The currently supported values
are:
S
Temperature: Upper Critical: Going High
S
Voltage Threshold: Lower Critical: Going Low
S
Memory: Correctable ECC Error Detected
NOTE
The event DIR/Type field is encoded with the event direction as the high bit (bit 7) and the event
type as the low 7 bits.
Example:
$ ipmitool − I lan − H test − pdupcr20 − 20 − U admin − P pass event 1
file <filename>
Purpose:
Event log records specified in filename will be added to the System Event Log. The
format of each line in the file is as follows:
<{EvM Revision} {Sensor Type} {Sensor Num} {Event DIR/Type} {Event Data 0}
{Event Data 1} {Event Data 2}> [#COMMENT]
NOTE
The Event DIR/Type field is encoded with the event direction as the high bit (bit 7) and the event
type as the low 7 bits.
Example:
0x4 0x2 0x60 0x1 0x52 0x0 0x0 # Voltage threshold: Lower
Critical: Going Low