USING THE IPMI TOOL SET
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008
102
Set Group State Command
This command is used to switch on/off all sockets belonging to a group. There is no
Get Group State command. Getting the state of a socket has to be carried out with
Get Receptacle State command.
Request Data
1
Group number
[7–5] reserved
[4–0] group number, valid numbers: 0–23
2
New state
[7–1] reserved
[0] 1b = power on, 0b = power off
Response Data
1
Completion Code
Set Group Membership Command
Request Data
1
Group number
[7–5] reserved
[4–0] group number, valid numbers: 0–23
2
[7–1] reserved
[0] 1b = enable group, 0b = disable group
3
[7] 1b = socket 7 belongs to group
…
[0] 1b = socket 0 belongs to group
4
[7] 1b = socket 15 belongs to group
…
[0] 1b = socket 8 belongs to group
5
[7] 1b = socket 23 belongs to group
…
[0] 1b = socket 16 belongs to group
Response Data
1
Completion Code
Summary of Contents for Managed ePDU
