USING THE WEB INTERFACE
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008
73
Configuring SNMP Logging
Event logging can be performed by sending SNMP traps to a third−party SNMP
manager. See Appendix C − Using SNMP" for instructions on enabling SNMP Event
Logging on ePDU.
Configuring Syslog Forwarding
To configure Syslog Forwarding:
1.
Select
Device Settings
, and then select
Event Log
. The Event Log Settings page
displays. The
Syslog Forwarding
panel controls the forwarding of system logs
(see Figure 70).
Figure 70. Syslog Logging Panel
2.
Select the
Enable Syslog Forwarding
check box.
3.
Type an IP address in the
IP Address
field. This is the address to which the Syslog
will be forwarded.
4.
By default, when Syslog Forwarding is enabled, seven event types display in the
Event Log Assignments
panel to the right. All are disabled by default. To enable any
of these event types, select the appropriate check boxes. See Figure 71.
Figure 71. Event Log Assignments Panel
5.
Click
Apply
. Syslog Forwarding is configured.
Summary of Contents for Managed ePDU
