Eaton DS7 Series, Manual

Page: 209 / 240

8 SmartWire-DT
8.9 Programming
DS7 Soft starter 09/16 MN03901001Z-EN www.eaton.com
205
SmartWire-DT read re) – Parameter channel error
If there is an error in the parameter channel, a positive SmartWire-DT read
re) – Parameter channel error will be generated. The error will be
contained either in a write job or a read job.
The following table lists the PROFIdrive profile’s parameter channel errors.
The various errors that are possible when using a DS7-SWD soft starter are
marked („DS7-SWD“ column).
Table 41: Parameter channel errors with PROFIdrive
Byte Designation Description
0 Request Reference Request identification: Is echoed
1 Response-ID Response ID: 81
hex
: Read job(-); 82
hex
: Write job(-)
2 DO-ID Drive-Object-ID: Is echoed
3 No. of Parameters Number of Parameters: 01
hex
4 Format Format: 44
hex
: Error
5 No. of Values Number of values: 01
hex
6 - 9 Error Number Fault Number: 00
hex
- 23
hex
Faultnumber
[hex] Designation Description Supplementary
information DS7-SWD
00 Invalid parameter number Attempting to access a non-available
parameter 0 ✓
01 Parameter value cannot be
changed Attempting to have write access to a
parameter that cannot be modified Subindex ✓
02 Value below lower limit or above
upper limit Attempting to have write access with a
value outside the value range Subindex ✓
03 Bad subindex Attempting to access to a non-available
subindex in a string or array parameter Subindex ✓
04 Not an array Attempting to use a subindex in order to
access a parameter without index 0
05 Incorrect data type Attempting to access a parameter with a
value not corresponding to the
parameter’s data type 0 ✓
06 Setting not allowed Write access with a non-zero value not
allowed Subindex ✓
07 Description element cannot be
modified Attempting to have write access to a
description element that cannot be
modified Subindex
08 reserved – –
09 No description data available Attempting to access a non-available
description. The value is not available. 0 ✓
0A reserved – –
0B No usage rights Attempting to have write access without
write permissions 0 ✓
0C reserved – –