1 Device series DS7
1.6 Checking the Delivery
DS7 Soft starter
09/16 MN03901001Z-EN
www.eaton.com
17
1.6 Checking the Delivery
The DS7 series soft starter are carefully packed and prepared for shipment.
These devices should only be shipped in their original packaging with suitable
transportation materials. Please take note of the labels and instructions on
the packaging, as well as of those meant for the unpacked device.
Open the packaging with adequate tools and inspect the contents
immediately after receipt in order to ensure that they are complete and
undamaged.
The packaging must contain the following parts:
•
A soft starter from the DS7-34…-N or DS7-34…-D series
•
an instructional leaflet IL (see table below).
If the delivered items are damaged, incomplete, or incorrect, please notify
the responsible sales office immediately.
→
Before opening the packaging go over the nameplate on the
packaging and check for whether the delivered soft starter is
the same part no. as the one you ordered.
Figure 6:
Equipment supplied with DS7 soft starter
Summary of Contents for DS7 Series
