SCWD-QS (12/16)
Page 34
Once the
gland nut
has been hand tightened into the
plug body,
use two adjustable wrenches to
further tighten the
gland nut
until it is snug in the
plug body
as shown in Figure 18 and the anode
wire is held firmly in the
plug body
and will not slip out.
Do not over-tighten the gland nut!
Figure 18. Secure the Anode Wire.
After the
plug
and anode wire have been assembled, re-connect the
sealing cap assembly tool
to
the
socket
on the compressor unit cabinet. After aligning the electrical contact pins, manually
engage the threads on the
plug locking cap
with the threads on the
socket
and turn clockwise until
the
plug
is firmly hand-tightened to the
socket
as shown in Figure 19.
If the anode wire rises away
from the compressor cabinet,
be sure to shape a drip loop into the contour of the anode wire near
the
plug
and
socket.
Figure 19. The Plug and Socket Joint
After the
plug
and
socket
joint is secured, the power may be turned
ON
at the disconnect.
Summary of Contents for SCWD-024-1C
