Embedded Solutions
Page 71 of 71
Order Information
Standard temperature range -40-85
ø
C
PCIe3IP
http://www.dyneng.com/PCIe3IP.html
Half-length PCIe card with three IndustryPack Module positions,
independent access, INT and MSI interrupt support, fused
filtered power to the IP’s, local power supplies, selectable 8 or 32
MHz operation per IP.
PCIe5IP
http://www.dyneng.com/PCIe5IP.html
Full-length PCIe card with five IndustryPack Module positions,
independent access, INT and MSI interrupt support, fused
filtered power to the IP’s, local power supplies, selectable 8 or 32
MHz operation per IP.
VPX2IP
http://www.dyneng.com/VPX2IP.html
VPX2IP - 3U 4HP with bezel or VPX connector/rear IO with
blank bezel with two IndustryPack Module positions,
independent access, INT and MSI interrupt support, fused
filtered power to the IP’s, local power supplies, selectable 8 or 32
MHz operation per IP.
IP-Debug-Bus
Provides test points on IP control signals, power switching to
allow hot swapping of IP’s. Recommended for first time users.
http://www.dyneng.com/ipdbgbus.html
IP-Debug-IO
When using IP-Debug-Bus, IP-Debug-IO provides the
connection to a 50 pin header for system IO connection or loop-
back testing.
http://www.dyneng.com/ipdbgio.html
-ROHS
Change to ROHS processing. Otherwise leaded solder is used
.
-CC
Add Conformal Coating for condensing environments
Drivers/Reference Software
Clients of PCIeIP have access to existing drivers and reference
software packages. The drivers detect the carrier and installed
IP’s, auto load known drivers for the IP’s or IP-Generic [included
with driver]. Support for Win7, and Linux with VxWorks in
development.
All information provided is Copyright Dynamic Engineering
