Dürkopp Adler 878-160722-M, Operating Instructions Manual

Page: 95 / 180

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021 93
Point position
The distance of the needle from the mate-
rial can be adjusted to allow precise
positioning of the sewing material when
starting sewing. The value entered here
corresponds to the degree number on the
handwheel.
Value range
000–359 [°]
Flat Sew
Transport correction at zero difference for
Flat Sew.
Value range
-20 to 20
Gap
Value for the gap between the motor-driven
edge guide and the needle (factoring in the
defined safety distance to the sewing feet).
Value range
8.0 to 45.0 [mm]
Correction speed effect
Correction speed effect
Value range
On/Off
(see

p. 97
)
Stitch length
The stitch length changes slightly
depending on the speed.
For this reason, the stitch length
can be adjusted at different
speeds by the software.
Needle thread tension
Depending on the speed, the nee-
dle thread tension can be adjusted
at different speeds by the software.
Sewing foot pressure
Depending on the speed, the sew-
ing foot pressure can be adjusted
at different speeds by the software.
Material thickness detection
Material thickness detection
Value range
On/Off
(see

p. 100
)
Stitch length
The stitch length changes slightly
depending on the material
thickness.
For this reason, the stitch length
can be adjusted to different mate-
rial thicknesses by the software.
Icon Parameter Settings