Dürkopp Adler 878-160722-M, Operating Instructions Manual

Page: 82 / 180

80 Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Creating/deriving a new role
To create a new role:
1. Press (only a role with fewer or equal authorizations than
your own).
 The list shows a new role.
2. Define the settings for the role (see table below).
Information
When logged in as a
Default Technician
, you can only select
role derivations up to the role of
Technician
. You can adjust this
setting in the authorizations of the roles (table below).
Settings of the roles
Read/Edit/Access Menu item
Parent role
Select from which role the new role is supposed to be derived.
The selection shows all previously created roles.
Programming
Access Access the programming ui
Edit Settings on the programming screen
Settings
Access Standard level
Access Technician level
Manual mode
Edit Bartack sewing
Edit Status bar
Edit Main screen
Access Role Main Screen