Dürkopp Adler 878-160722-M, Operating Instructions Manual

Page: 50 / 180

Settings via the software
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021 48
5.4 Manual mode
Fig. 30: Parameters in manual mode
The following table shows the individual symbols (parameters) on
the display and the functions of the keys on the control panel.
When a parameter is selected, its color on the display changes.
When a parameter is changed, its new value is loaded immedi-
ately.
Symbol Meaning
(depending on the assignment)
Programming
• Press the upper softkey
Quick access function (softkey menu)
• Press the lower softkey,

5.4.1 Quick access func-
tion (softkey menu)
, str. 50.
Program number
Value range: 000 to 999
Program 000 indicates that the controller is in
Manual
mode .
• Use  /  to select the Program parameter.
• Use  /  to change the program number.
Or:
• Input the program number directly using the keys
0 to 9 and confirm with OK as required.

This takes you into Automatic mode .
Stitch length
Value range: 0.0 to 7.0 mm (depending on the sewing
equipment)
• Use
 /  to select the Stitch length parameter.
• Use  /  to change the stitch length