Dürkopp Adler 878-160722-M, Operating Instructions Manual

Page: 134 / 180

132 Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
6.7.6 Setting the
Seam Begin/Segment Begin
parame-
ters
There are various options for setting the Seam Begin/Segment
Begin parameters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Icon Parameter Settings
Seam begin bartack parameters
Bartack at seam begin
Value range
On/Off
Number of stitches backwards
Value range
01 to 50
Number of stitches forward
Value range
01 to 50
Number of bartack sections
A bartack consists of several sections. If
the sewing direction is changed, a new
section is started. The number of sections
in a bartack can be set here.
Value range
01 to 99
Stop-Time for direction change
The waiting time at the turning points
(e.g. for a change of sewing direction) is set
at this point. A short waiting time in
milliseconds should ensure consistent seam
quality (ornamental-stitch bartack).
Value range
0000–1000 [ms]