Dürkopp Adler 878-160722-M, Operating Instructions Manual

Page: 79 / 180

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021 77
6.3.2 Authorizations as
Default User
The factory setting for the
Default User
is such that the default
user will be logged in automatically when the machine is switched
on. This neither requires the input of a password nor a USB key
or an NFC chip.
User management cannot be selected as a
Default User
( 
p. 72
):
Fig. 51: Authorizations as
Default User
6.3.3 Authorizations as
Default Technician
The factory setting for the Default Technician requires that the
technician enter their username and password (
technician,
25483
). The Default Technician has more far-reaching authori-
zations than the Default User. They are explained in more detail
below.
If selecting User Management as a
Default Technician
( 
p. 72
), you will be presented with the following interface: