Dürkopp Adler 878-160722-M, Operating Instructions Manual

Page: 123 / 180

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021 121
Counter Mode
Daily piece counter, can be set to count
either up or down.
Off/Up/Down
Reset
When the daily piece counter is
activated, it must be reset once after
entering a value to ensure it counts
correctly.
Point position
The distance of the needle from the
material can be adjusted to allow
precise positioning of the sewing
material when starting sewing.
The value entered corresponds to the
degree number on the handwheel.
000–359 [°]
Flat Sew
Transport correction at zero difference
for Flat Sew.
Value range
-20 to 20
Correction speed effect
Correction speed effect
Value range
On/Off
(see

p. 125
)
Stitch length
The stitch length changes slightly
depending on the speed. For this
reason, the stitch length can be
adjusted at different speeds by the
software.
Needle thread tension
Depending on the speed, the needle
thread tension can be adjusted at
different speeds by the software.
Sewing foot pressure
Depending on the speed, the sewing
foot pressure can be adjusted at
different speeds by the software.
Material thickness detection
Material thickness detection
Value range
On/Off
(see

p. 128
)
Icon Parameter Settings