Dürkopp Adler 806N-111, Operating Instructions Manual

Page: 49 / 162

Operation
Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020 47
Fig. 33: Inserting the transfer plate (2)
2. Firmly press the connecting piece (2) on the right side of the transfer
plate and the connecting piece (1) on the right side of the transfer frame
into one another.

They click into place, and the transfer plate is fixed on the right side.
Fig. 34: Inserting the transfer plate (3)
3. Place the peg (1) at the rear right of the transfer plate in the forked
plastic holder (2) to the right, under the transfer frame.
4. Firmly press the connecting piece on the left side of the transfer plate
and the connecting piece (1) on the left side of the transfer frame into
one another.

They click into place, and the transfer plate is connected to the trans-
fer frame on both sides.
5. Move the transfer plate up and down.

If the plate is wobbling noticeably, the peg is not fixed in the plastic
holder.

The transfer plate is correctly inserted if it is no longer wobbling.
Carry out a test run.
6. Use your right thumb or index finger at the rear right corner of the
transfer frame to press the flexible plastic holder downwards until the
peg (3) slides in.
7. Move the transfer plate up and down again to check.

The transfer plate is correctly inserted if it is no longer wobbling.
8. Fit the pneumatics.
9. Tighten the star screw.
(1)- Connecting piece on transfer frame (2) - Connecting piece on the transfer plate
(3) - Peg on the transfer plate (4) - forked plastic holder
①
②
③
④