Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 121

Page: 121 / 162

Setup

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

119

7.5

Electrical connection

The power cable is already installed on the machine. On delivery it lies in-
side the machine.

Important

A country-specific plug must be fitted to the cable.

DANGER

Risk of injury from electricity!

Unprotected contact with electricity can result in
serious injuries or death.

Work on the electrical system must ONLY be
performed by qualified electricians or appropriately
trained and authorized personnel.

ALWAYS pull the power plug before working on the
electrical equipment.

NOTICE

Property damage may occur!

The machine can be significantly damaged or destroyed by contact
with the incorrect mains voltage.

ONLY connect the machine to the specified mains voltage!

The machine is ONLY to be connected by qualified specialists.

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands