Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 14

Page: 14 / 162

Safety

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

Symbols

The following symbols indicate the type of danger to personnel:

Examples

Examples of the layout of warnings in the text:



This is what a warning looks like for a hazard that will result in serious
injury or even death if ignored.



This is what a warning looks like for a hazard that could result in seri-
ous or even fatal injury if ignored.

Symbol

Type of danger

General

Electric shock

Puncture

Crushing

Environmental damage

DANGER

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the danger.

WARNING

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the danger.

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands