Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 46

Page: 46 / 162

Operation

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

Removing the middle slide

Fig. 29: Removing the middle slide

To remove the middle slide:

Remove the edge folding frame.



The middle slide can now be easily reached.

Raise the carriage (7) to the rear such that the pins (6) on the middle
slide are exposed.

Pull out the middle slide towards the front.

Removing the hose insert (optional)

(6)

- Pin

(7)

- Carriage

⑥

⑦

NOTICE

Property damage may occur!

The compressed air connection could become damaged through
improper decoupling.

NEVER remove the compressed air connection by force.

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands