Dürkopp Adler 806N-111, Operating Instructions Manual

Page: 42 / 162

Operation
40 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
To set the height of the sewing foot:
1. Turn the adjusting wheel (4)
• Raise sewing foot: turn counterclockwise
• Lower sewing foot: turn clockwise
4.11.2 Setting the upper stroke position
Information
The sewing foot can be set to the upper stroke position when sewing thick-
er sewing material.
Sewing thicker sewing material requires that the seam program contain a
corresponding entry.
The sewing foot (1) is supposed to lightly touch the plastic (2) of the trans-
fer plate (3) when at the bottom dead center.
To set the upper stroke position:
1. Turn the adjusting wheel (5):
• Raise sewing foot: turn counterclockwise
• Lower sewing foot: turn clockwise
4.12 Changing the shaping assembly
If you perform the basic settings via the software (

p. 74 ), the machine
will identify the inserted shape in its reference run. In the selection window
for the seam program, you will be able to see the numeric code for the
shape and then initiate a change of shape (

p. 85 ).
A shaping assembly consists of the following components:
Component Name and purpose
Edge folding frame
• consisting of an outer frame with inner frame, this
component folds the pocket blank