Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 131

Page: 131 / 162

Disposal

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

129

10 Disposal

Do not dispose of the machine in the general household waste.

The machine must be disposed of in a suitable and proper manner and in
accordance with all applicable national regulations.

When disposing of the machine, be aware that it consists of a range of dif-
ferent materials (steel, plastic, electronic components, etc.). Observe the
applicable national regulations when disposing of these materials.

CAUTION

Risk of environmental damage from improper

disposal!

Improper disposal of the machine can result in
serious environmental damage.

ALWAYS comply with the legal regulations
regarding disposal.

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands