Dürkopp Adler 806N-111, Operating Instructions Manual

Page: 62 / 162

Operation
60 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
3. Press button 2 (6).

The middle slide (2) is raised.
1. Press button 1 (4).

The flap clamp moves to the right to the loading position.
Fig. 45: Sewing (806N-521) (3)
2. Position the flap (8) in the flap clamp (7) and align it.
3. Press button 1 (4).

The flap clamp (7) closes.
4. Press button 1 (4).

The flap clamp (7) moves to the left, the folding device moves to the
front.

The edge folding process starts.
5. Press button 1 (4).

The sewing material isfed to the sewing unit, sewn, and deposited on
the stacker using the outfeed roller.
If the transfer of the sewing material to the sewing unit expires, then a new
sewing cycle can commence.
A light signaling the machine's readiness for use is not available. If the ma-
chine is not yet ready, nothing will happen after a press on button 1 (4).
Information
A laser positioning aid for the 806N is available as additional equipment.
It facilitates exact alignment on the sewing material support surface when
the basic part is being applied.
(7) - Flap clamp (8) - Flap
⑦ ⑧
⑦ ⑧