Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 85

Page: 85 / 162

Programming

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

5.5.5 Activating middle slide automatically forward

The middle slide is at the front when a new sewing cycle begins.

Activating mode

Middle slide automatically forward

To activate the mode

Middle slide automatically forward

Press the

Middle slide automatically forward

button



The button is highlighted in green.



The mode

Middle slide automatically forward

is activated.

Press the

Middle slide automatically forward

button

again to

exit this mode.



This exits the mode.



The button is no longer highlighted in green.

This setting is deleted after switching off the machine, after loading a dif-
ferent seam program or after an EMERGENCY STOP.

Operating mode

Middle slide automatically forward

To operate the mode

Middle slide automatically forward

Place the pocket blank on the middle slide.

Place and align the basic part on the edge folding station.

Fasten the basic part by pressing button 1 or the pedal.



The air suction is now switched on.

Press button 1 to start the sewing process.

CAUTION

Risk of injury from sharp parts!

Cutting.

Do NOT reach into the area of the middle slide.

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands