Dürkopp Adler 806N-111, Operating Instructions Manual

Page: 116 / 162

Setup
114 Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020
2. Pull the cover upwards.
3. Insert the cover upwards into the guide hooks.

The cover is locked in place by the springs on the lower guide hooks.
4. Fit the plate.
5. Fasten the plate with the screws.
Cover - Left side (2)
To assemble the cover on the left side (2):
1. Insert the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Insert the cover upwards into the guide hooks.

The cover is locked in place by the springs on the guide hooks.
4. Slide the retaining bar into the guide.
5. Fasten the screws on the retaining bar.
Covers on the rear (10)
To assemble the covers on the rear (10):
1. Insert the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Insert the cover upwards into the guide hooks.

The cover is locked in place by the springs on the guide hooks.
Cover - Front left (4)
To assemble the cover at the front left (4):
1. Hang the cover in place.
Cover - Front right (7)
To assemble the cover at the front right (7):
1. Insert the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Insert the cover upwards into the guide hooks.
4. Release the screw using a hex key through the front middle hole.
Cover - Stacker (8)
To assemble the stacker cover (8):
1. Pivot the stacker away from the machine.
2. Insert the cover from above.