Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 120

Page: 120 / 162

Setup

118

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

Tighten the counternut (2) again.

Repeat steps 2 to 4 for the other feet.



The machine is aligned level.

7.4.2 Assembling the thread reel holder

Due to its height the thread reel holder is not installed when the machine
is delivered.

Important

The thread reel holder must be installed with the covers in place because
the covers can no longer be assembled when the thread reel holder is
installed.

Fig. 86: Assembling the thread reel holder

To assemble the thread reel holder:

Insert the thread reel holder (1) into the hole in the thread reel holder
bracket (2).

Align the thread guide (4) at right angles to the sewing arm.

Clamp the thread reel holder (1) using the clamping lever (3).

(1)

- Thread reel holder

(2)

- Thread reel holder bracket

(3)

- Clamping bracket

(4)

- Thread guide

①

③

②

④

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands