Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 53

Page: 53 / 162

Operation

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

4.14 Sewing after a needle thread breakage

If the needle thread monitor indicates a needle thread breakage, the dis-
play shows an error message.

Sewing after a needle thread breakage

Fig. 38: Sewing after a needle thread breakage (1)



The

Start

button flashes green.



The machine enters the Safe stop mode.



The sewing head is raised.

To sew after a needle thread breakage:

Thread needle thread (



p. 26

Press the

Start

button.



The Start button flashes green.



Safe stop mode is switched off.



The machine moves in front of the position where the needle thread
broke and lowers the sewing head.



The display shows a notice.

Fig. 39: Sewing after a needle thread breakage (2)

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands