Dürkopp Adler 806N-111 Operating Instructions Manual Download Page 129

Page: 129 / 162

Packaging and transport

Operating Instructions 806N-111/806N-121 - 04.0 - 12/2020

127

9.2

Packing the machine

Pack the machine so that it cannot slip or fall over. Select a stable base
and fasten the machine to this. Use covers to provide protection from
external damage to the machine.

9.3

Transporting the machine

Assemble the transport locks before transporting the machine.

Ensure the highest possible degree of safety when transporting the
machine:

• Fasten the machine

• Wear the designated protective equipment

WARNING

Risk of injury due to own weight of machine and
sharp-edged packaging materials!

Crushing or cutting.

ALWAYS wear gloves and safety shoes when
packing the machine.

ALWAYS watch out for sharp edges on clamps,
paper and packing straps.

WARNING

Risk of injury due to unstable transport!

Crushing.

ALWAYS use a sturdy lifting carriage.

ALWAYS wear safety gloves and safety shoes.

Lift the machine a MAXIMUM of 20 mm.

ALWAYS securely fasten the machine.

Summary of Contents for 806N-111



































































































































































Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands

Dürkopp Adler 806N-111, Operating Instructions Manual

Search results

Summary of Contents for 806N-111

Reviews:

Related manuals for 806N-111

Brands by name

Popular brands